Description
Bassists who’ve hauled a 4×10 to a bar gig know the tradeoff usually comes down to punch versus portability. GK built the CX410 to erase that compromise. Each of the four 10-inch drivers is a custom design made in-house, wound with edge-wound aluminum 2-inch voice coils, giving this cab a low-end push and efficiency you don’t normally get out of 10-inchers.
- Every speaker sits in its own sealed chamber, so you’re not fighting standing waves or leakage bleeding your tone through the cabinet walls
- The port is tuned specifically for these drivers, paired with jute damping material dialed in at the right frequencies for a tight, controlled response
- Sure Lock stacking feet and corners click together for a rock-solid stack, no shifting on stage
- Vinyl covering with metal corner protection and plywood construction take the abuse of load-in after load-in
- Flip-grip side handles make this cab genuinely manageable to move on your own
- Three-position tweeter attenuator lets you dial in the top end to taste
- One professional twist-lock speaker connector plus a standard 1/4″ input for no-nonsense hookup
Rated at 800 watts running at either 4 or 8 ohms, this cabinet flexes into most rigs without a headache. It measures 14.5 x 23 x 26.5″ and weighs in at 67 lbs — enough cab to move air, not so much that it wrecks your back.
This unit is open box and graded mint condition, so you’re getting the full GK CX410 experience at a price break, with nothing missing in terms of tone or build quality.
Reviews
There are no reviews yet.