Description
Some rigs give you thump. Others give you clarity. The SVT-610HLF gives you both, no compromise. Six 10″ speakers gang up to move more air than three 18s or four 15s — and because tens have less cone mass to wrangle, they snap back on fast transients that bigger drivers simply can’t keep up with. Pop, slap, dig in with a pick, whatever you throw at it, this cabinet responds instantly.
Up top, a 1″ horn driver crossed over at 5kHz cuts through the mix with real high-fidelity sparkle, and the variable HF L-Pad lets you dial that top end in or back it off depending on the room. It’s a serious asset for five- and six-string players who need the low B to stay tight while the high strings still cut through the wash of a full band.
Built from Baltic Birch plywood and fitted with a tilt-back handle bar, 3″ dolly-style casters, and skid rails, this cab is made for load-in, not just the studio. Wire it up through the 1/4″ or Neutrik Speakon jacks and let it do the heavy lifting.
- LF Drivers: 6 x 10″, 2″ voice coil, 30 oz magnet each
- HF Driver: 1″ horn, 1″ voice coil, 8 oz magnet
- RMS Power Handling: 600 Watts
- Frequency Response (-3dB): 53Hz-18kHz
- Usable Low Frequency (-10dB): 42Hz
- Nominal Impedance: 4-Ohms
- Sensitivity: 98dB / Max SPL: 125dB
- Dimensions (W x H x D): 24 x 40 x 16 inches
- Shipping Weight: 135 lbs / Handling Weight: 110 lbs
Reviews
There are no reviews yet.